Home    About Us   Map    Terms & Conditions    Contact Us    Links    Help

Online Shop
Classified ads

Up

Proficlear Filters

The new Oase Proficlear filter range is a modular, highly configurable and expandable filter system designed to cope with the largest and most demanding ponds. It can be used as a pumped or gravity fed system All modules include pipe fittings and drain with fitted slide valve.
Each module is 800mm (L) x 600mm (W) x 800mm (H)

Module 1

Pump Chamber

The Oase Proficlear module 1 features 2 inlets (bottom drain and skimmer) if being used with pump fed system or will connect as the last chamber in a gravity system.
Pump is raised off the bottom of the chamber to keep it clear of sediment.
Can be used with more than one pump.
All pipes exit through the side walls.
Drain situated under pump support grid with slide valve handle at the top for easy sediment removal.
Can be used to upgrade any other filter system.

Module 2

Coarse debris extractor

The Oase Proficlear module 2 removes solids down to 300 microns thus protecting the rest of the system from debris and extending time between cleaning.
Pollutant level indicator signals the need for cleaning. This is achieved by twisting the cleaning handles to clean the stainless steel sieves then open the slide valve to waste.
Can be fitted instead of a vortex chamber on most other filter systems.
***New optional screen drive cleans sieves automatically.***

Module 3

Filter Foam

The Oase Proficlear module 3 provides second stage mechanical and first stage aerobic biological filtration ensuring the safe decomposition of ammonia and nitrite by utilising the large surface area of the coarse and fine foams. The foams can be cleaned by compressing them in situe with the cleaning handles. This makes the job quicker, easier and cleaner than traditional systems and is much safer for the bacteria that do the filtering. The waste water is then drained by opening the slide valve. There are connections on this chamber for additional aeration.
Can be used to upgrade most other filter systems.

Module 4

Bioballs

The Oase Proficlear module 4 provides a second stage of  aerobic biological filtration. The bioballs are freely rotating in the water flow to ensure maximum utilisation of the massive surface area and to keep them maintenance free. There are connections for additional aeration and any fine sediment can be flushed to waste via the slide valve.
Can be used to upgrade most other filter systems.

Module 5

Phosphate binder

The Oase Proficlear module 5 provides anaerobic de-nitrification and phosphate removal. Most of the water is passed through filter foams where it is starved of oxygen. This process will convert Nitrate into Nitrogen gas by utilising anaerobic bacteria. Careful flow channeling ensures that the foams do not clog and are virtually maintenance free. A small proportion of the water is channeled through Phosless inserts which remove phosphate from the water. Nitrate and phosphate are the main causes of excess algae in the pond.
IT IS IMPORTANT THAT NO AERATION IS PROVIDED IN THIS MODULE.
Can be used to upgrade most other filter systems.

The maximum flow through these filter modules should be 12,500 litres per hour. When using on large ponds or when a high flow rate is required the sets of modules should be arranged in parallel therefore doubling the maximum flow rate. There is no maximum for the amount of modules that can be used or the number of parallel rows.